Model PRO-6100
Class 60"
Ink Type Pigment Ink
Maximum Print Resolution 2400 x 1200 dpi
Stand Type Assembly Type
Unpackaged Dimensions W x D x H (mm), Weight (kg)
Main Unit + Stand + Basket 1999 x 984 x 1168 (Basket Opened)
1999 x 766 x 1168 (Basket Closed)
Weight Approx. 143 kg (Excluding Roll Holder Set, Ink and Print Head)
Main Unit + Roll Unit + Stand + Basket Weight Approx. 171 kg (Including Roll Holder Set, Excluding Ink and Print Head)
Packaged Dimensions W x D x H (mm), Weight (kg)
Printer (Main unit with stand and pallet) 2227 x 915 x 1022 mm, Weight: Approx. 212 kg
Roll Unit 2133 x 562 x 461 mm, Weight: Approx. 42 kg
Power Supply
Input Power AC 100-240 V (50-60 Hz)
Power Consumption Printing: 97 W or Less
Standby Power Consumption 2.0 W or Less (USB Connected)
Power Off (Standby) 0.3 W or Less
Operational Environment
Temperature: 15~30 o
C, Humidity: 10~80 % RH (no dew condensation)
Acoustic Noise
Acoustic Pressure Operation Approx. 48 dB (A)
Standby: 35 dB (A) or Less
Acoustic Power Operation approx. 6.6 Bels or Less
Detector and Adjustment
Registration Adjustment Automatic/Manual
Banding Adjustment Automatic/Manual
Line Length Adjustment Manual
Head Slant Adjustment Automatic
Colour Calibration Yes (with a colour calibration notification function)
Head Gap Adjustment Automatic/Manual (6 Levels)
Non-firing Detection Yes
Non-firing Compensation Yes
Roll Media Remaining Detection Function
Barcode Print or Estimation Function
Line Accuracy
±0.1 % or Less
User adjustments necessary. Printing environment and media must match those used for the adjustments.
CAD paper required: Plain paper, CAD tracing paper, coated paper, CAD translucent matte film only.
Memory
Standard Memory 3 GB
Firmware
Languages – Printer Language SGRaster (Swift Graphic Raster)
Update Updated from USB, Ethernet Port (Utility Use)
Operation Panel
Display 4.3 inch Colour LCD Touch Screen
Hard Disk
500 GB
Interface
USB B Port – Type Built-in (Hi-speed USB )
USB B Port – Mode Full Speed (12 Mbit/sec), High Speed (480 Mbit/sec), Bulk Transfer
USB B Port – Connector Type Series B (4 pins)
USB A Port USB Memory (Direct Print)
Gigabit Ethernet – Type Built-in
Gigabit Ethernet – Standard IEEE 802.3 10base-T
IEEE 802.3u 100base-TX/Auto-negotiation
IEEE 802.3ab 1000base-T/Auto-negotiation
IEEE 802.3x Full Duplex
Gigabit Ethernet – Protocol SNMP (Canon-MIB ), HTTP TCP/IP (IPv4/IPv6)
Wireless LAN – Standard IEEE802.11n/IEEE802.11g/IEEE802.11b
Wireless LAN – Security WEP (64/128bit)
WPA-PSK (TKIP/AES)
WPA2-PSK (TKIP/AES)
Print Head
Model PF-10
Type Bubble-jet On-demand
Head Configuration 12 Colour Integrated Type x 1 Print Head
Nozzle Pitch 600 dpi x 2
Nozzle Per Chip 18,432 Nozzles (1,536 Nozzles x 12 Colour)
Droplet Size Minimum 4pl Per Colour
Ink Tank
Model PFI-1100 (160 ml)/PFI-1300 (330 ml)/PFI-1700 (700 ml)
Supply Tubing System (with Sub-tank)
Sub-ink Tank Capacity Each Colour 30 ml
Colours Pigment 12 Colour (PBK/MBK/C/M/Y/PC/PM/GY/ PGY/R/B/CO)
Ink Tank Size – Sales 160 ml, 330 ml or 700 ml
Ink Tank Size – Starter 330 ml
Level Detection Detected by dot count and electrode
Smart Chip Each ink tank is equipped with EEPROM which stores its ink level
Cutter
Model CT-07
Type Automatic Horizontal Cutting (Rotary Cutter): Standard
Other Consumables
Maintenance Cartridge MC-30
Media Feed and Output
Roll Paper One Roll, Front-loading, Front Output
Added Roll Paper One Roll, Front-loading, Front Output
Cut Sheet Front-loading, Front Output (Manual feed using media locking lever)
Paper Path Switch (Roll/Cut Sheet) Manually Switchable by User
Delivery Direction Face-up, Front side
Media Take-up Unit Dual direction – Rolling Take-up
Media Thickness
Roll Paper 0.07~0.8 mm
Cut Sheet 0.07~0.8 mm
Maximum Outside Diameter of Roll Paper
170 mm or Less
Media Core Size
Internal Diameter of Roll Core: 2"/3"
Media Width
Roll Paper 152.4~1524 mm
Cut Sheet 152.4~1524 mm
Minimum Printable Paper Length
203.2 mm
Margins – Recommended area
Roll Paper Top: 20 mm, Bottom: 3 mm, Side: 3 mm
Cut Sheet Top: 20 mm, Bottom: 20 mm, Side: 3 mm
Margins – Printable area
Roll Paper Top: 3 mm, Bottom: 3 mm, Side: 3 mm
Roll Paper (Borderless Print) Top: 0 mm, Bottom: 0 mm, Side: 0 mm
Cut Sheet Top: 3 mm, Bottom: 20 mm, Side: 3 mm
Borderless Printing
Media Width Recommended – 515 mm (JIS B2), 728 mm (JIS B1), 1030mm (JIS B0), 594 mm
(ISO A1), 841 mm (ISO A0), 10", 14", 17", 24", 36", 42", 44", 50", 54", 60"
Printable – 257 mm (JIS B4), 297 mm (ISO A3), 329 mm (ISO A3+), 420 mm
(ISO A2), 6", 8", 12", 16", 20", 22", 30", 300 mm, 500 mm, 600 mm, 800 mm,
1000 mm and Custom Roll Width (152.4~1524 mm)
“Printable” size is printed as micro marzin tecnology, that means is not used
with hole of platen.
Regulations Electrical Safety Regulations Electromagnetic Interface
Regulations
Australia RCM RCM
Environment Certifications
TUV, CB, EPEAT
Options
Roll Unit RU-63
2/3" Roll Holder RH2-6
