|
Showing 100 items.
The Double Carriage allows two rails to be attached while still allowing full movement between them.
More...
Order
NO STOCK - BACK ORDER
![]()
BW-2604 Single Carriage (400g)
Allows equipment to be attached to the rails.
More...
Order
COMING SOON
![]()
BW-2608 Standard LiteLift Pantograph (4.4kg)
Extends from 28cm to 121cm and is designed for lower ceiling heights
More...
Order
COMING SOON
![]()
BW-2608/S Short LiteLift Pantograph (3.4kg)
Extends from 28cm to 121cm and is designed for lower ceiling heights
More...
Order
COMING SOON
![]()
The Back to Back Clamp is used for mounting rails at 90 Degrees to the fixing bracket or to each other.
More...
Order
COMING SOON
![]()
The joining Plate is used to increase the length of fixed rails or to join together a perimeter track.
More...
Order
COMING SOON
![]()
Use these to connect curtains, canvas or muslin background cloths directly to the HiGlide rail.
More...
Order
NO STOCK - BACK ORDER
![]()
This clamp with spigot is used to attach items to the rail system that will not be required to move.
More...
Order
NO STOCK - BACK ORDER
![]()
The BW-2636 Hi-Glide 3M Lite-Lift Pantograph includes two compensator springs, safety cable and spring removal key.
More...
Order
COMING SOON
![]()
Up to three rails can be simultaneously connected for mounting perimeter curtains and cycloramas.
More...
Order
NO STOCK - BACK ORDER
![]()
A braked version of the smooth running Six Wheel Carriage ensures that your equipment stay in their set position.
More...
Order
NO STOCK - BACK ORDER
![]()
A pair of hooks to carry up to three rolls of background paper on a moving rail.
More...
Order
NO STOCK - BACK ORDER
![]()
The Adjustable Girder Clamp attaches rails to girders (RSJ or I Beams) with widths from 6 to 20cm.
More...
Order
COMING SOON
![]()
This Side Mount Bracket is a component of (or replacement part for) the Hi-Glide Rail System.
More...
Order
NO STOCK - BACK ORDER
![]()
This Cross Mount Bracket is a component of (or replacement part for) the Hi-Glide Rail System.
More...
Order
NO STOCK - BACK ORDER
![]()
Addalite carraige
BW-2660 Addalite Carriage (399g)
Specially designed carriage that can be added to a rail without removing end stops.
More...
Order
NO STOCK - BACK ORDER
![]()
The fixed length Drop Ceiling Supports allow the rails to be fixed at the correct height for effective operation.
More...
Order
COMING SOON
![]()
The fixed length Drop Ceiling Supports allow the rails to be fixed at the correct height for effective operation.
More...
Order
NO STOCK - BACK ORDER
![]()
A Bowens Drop Ceiling Support is a component of the Hi-Glide Rail System that allows the rails to be fixed at a desired height for the most effective operation.100>110cm adjustable
More...
Order
IN STOCK
![]()
Complete kit for small studios composed of 3 rails 3M long (two fixed and one mobile) and supports for 2 light sources (2 Telescopic Post).
More...
Order
IN STOCK
![]()
The Manfrotto FF3043 Top System 43 is complete kit for medium-sized studios composed of 2 fixed rails 4m long, 2 mobile rails 3m long and supports for 3 light sources
More...
Order
NO STOCK - BACK ORDER
![]()
Complete kit for large studios composed of 2 fixed rails 5m long, 3 mobile rails 3m long and supports for 5 light sources (4 Top Pantographs).
More...
Order
IN STOCK
![]()
Easy to be installed. This will allow you to have less expenses in comparison with other traditional systems. Wide choice of the accessories that allows you to find a solution for all your requirements.
More...
Order
IN STOCK
![]()
Aluminium stand. Supplied with sandbag counterweight (empty) for maximum stability and smoothness. Legs and column in steel, last two sections in aluminium.
More...
Order
IN STOCK
![]()
Bracket for ceiling attachment of the rail. It is advisable to pre-assemble these brackets onto the rails at ground level to ensure correct alignment before screwing to a ceiling.
More...
Order
IN STOCK
![]()
Its length is adjustable from 10cm to 15,5cm. Using the clamp screw, you can obtain all intermediate sizes.
More...
Order
NO STOCK - BACK ORDER
![]()
Used alone or in combinated this braket allow the attachment of the rails at the desidered height.
More...
Order
NO STOCK - BACK ORDER
![]()
These are inserted from the end of the rail. They do not need wheels as they they slide along the rail and are suitable for normal cables.
More...
Order
IN STOCK
![]()
These are from the end of the rail and run on ball-bearings. They are suitable for heavy cables.
More...
Order
NO STOCK - BACK ORDER
![]()
This carriage can be inserted directly at any point on the rail by unscrewing the wheel plate. This is used when it becomes necessary to add a supplementary carriage to an already assembled RAIL SYSTEM installation.
More...
Order
IN STOCK
![]()
This is equipped with brakes on both upper and lower carriages. The upper brake blocks the carriage on the fixed rail, while the lower carriage's brake blocks the sliding of the moving rail.
More...
Order
NO STOCK - BACK ORDER
![]()
A telescopic system for the balanced suspension of loads. Adjustable in height with automatic positioning at the desired position.
More...
Order
NO STOCK - BACK ORDER
![]()
A telescopic system for the balanced suspension of loads. Adjustable in height with automatic positioning at the desired position.
More...
Order
NO STOCK - BACK ORDER
![]()
Has seven 16mm spigot and can be mounted, either in a horizontal or a vertical position, to pantograph or extensions. Can carry up to six appliances.
More...
Order
IN STOCK
![]()
Sky track accessories
Studio accessories
professional al reliable accessories
More...
Order
IN STOCK
![]()
The Manfrotto Sky Track FF3282 Slide Carriage Motor provides precise positioning of lights with ease and speed, eliminating the clutter of light stands and power cables on the floor.
More...
Order
IN STOCK
![]()
The Manfrotto Sky Track FF3450 Motorised Head is motorised head with 2 motors for the rotation made up of a small bank, flash or television camera.
More...
Order
IN STOCK
![]()
The pantograph is made of aluminium (P-Al MgSi UNI 3569) and manufactured according to DIN 15560-46. The attachments at both ends of the pantograph are 16mm, male on the bottom and female on the top.
More...
Order
NO STOCK - BACK ORDER
![]()
The 16mm spigot allow the mounting of lights or accessories with 16mm female attachment.
More...
Order
IN STOCK
![]() |
![]() ![]() |